Forum

Can't control pitch...
 
Notifications
Clear all

Can't control pitch with 1V/OCT & and other CV Issues  

  RSS

DannyProud
New Member
Joined: 8 months ago
Posts: 3
25/12/2019 8:08 pm  

Hi,

I got the Delta CEP A for Christmas and I'm really enjoying it. The only problem I have is that my unit isn't responding to 1V/OCT CV inputs. As soon as a plug something (like an LFO) into the 1v/OCT input the pitch lowers but nothing else happens. I can control the pitch via MIDI but not with 1V/OCT. 

FM and MOD input on the Swarm Osc don't work either. The Speed and Depth inputs on LFO1, MOD on the mixer, 1V/OCT on the VCF and decay on the ADSR also don't work. So basically half of the patchbay is behaving odd. 

Am I missing something? Maybe I'm in the wrong mode? I've already updated the unit to the newest firmware and the issue persists. 

Thanks for the help in advance

d-


Quote
Topic Tags
Jorg Schaaf
Member Admin
Joined: 3 years ago
Posts: 62
25/12/2019 10:27 pm  

That sounds strange to me. So, I assume the Manual Mode is active?  If you connect the internal LFO with a cable any of these inputs, nothing happens? That sounds to me lie a defective unit or a defective cable. But these inputs work normally always only setting them up with the knobs does only work in manual mode.


ReplyQuote
DannyProud
New Member
Joined: 8 months ago
Posts: 3
26/12/2019 12:01 am  

@elektro_lurch

Thanks for the quick reply Jörg!

Manual Mode is active (green light on). If I connect the LFO to one of the mentioned inputs nothing happens. If I connect the lfo to the Cutoff for example the VCF starts being modulated. If you say that it usually always works,  then I guess the inputs are faulty... 

-d


ReplyQuote
Jorg Schaaf
Member Admin
Joined: 3 years ago
Posts: 62
26/12/2019 8:26 am  

That's not really cool. I am sorry for that. Please contact me directly via email for service. My email address is:
j.schaaf@raditec.de


ReplyQuote
DannyProud
New Member
Joined: 8 months ago
Posts: 3
26/12/2019 1:47 pm  

@elektro_lurch

I've wrote you an email.

Thanks again!


ReplyQuote
Jorg Schaaf
Member Admin
Joined: 3 years ago
Posts: 62
26/12/2019 4:06 pm  

Yes! I anwered your emails already!


ReplyQuote